Precautions after use of wire rope NDT detector

Release time:

2021-07-09

Wire rope nondestructive testing instrument is a kind of instrument used to detect wire rope, which can detect the broken wire and corrosion fatigue of wire rope, so as to find out the damage location and degree, inform people of the results to judge and make treatment choices. Now the testing instrument is generally used in the petroleum industry, elevators and mines,

Precautions after use of wire rope NDT detector

　　Wire rope NDT detectorIt is an instrument used for flaw detection of steel wire ropes. It can detect problems such as broken wires and corrosion fatigue of steel wire ropes, so as to find out the damage location and degree, inform people of the results so as to make judgments and make treatment choices. At present, detectors are generally used in the petroleum industry, elevators and mines. In addition, construction machinery and other high-quality instruments can be used for detection. The detection results are accurate and the detection speed is fast, and the instrument is easy to use, but many people still can't use it correctly when using it. I don't know how to deal with it after use. What should I pay attention? Today, Baikete Xiaobian will share with you what to pay attention to after using the detector? Only pay attention to these when in use can make the test results and the instrument more accurate and safe, let's take a look at it!

1. After the use of the test is completed, the results must be sorted and analyzed to see if they are accurate. If there are doubts, the test can be carried out again. If it is confirmed to be correct, professionals can be allowed to cooperate to remove the wire rope NDT detector.

2. Pay attention to the wire rope flaw detector after removing it. First check the wire rope flaw detector to see if there is any fault or other problems in the whole wire rope flaw detector. Turn on the switch to see if it can operate normally. At the same time, pay attention to the power quantity of the wire rope nondestructive flaw detector.

3. After that, use professional tools to clean the wire rope flaw detection, remove stains and dust, so as to prevent the wire rope NDT detector from receiving pollution problems and affecting normal use.

4. After cleaning, check whether it needs to be charged according to the electric quantity of the wire rope NDT detector. If the electric quantity is insufficient, it needs to be charged to ensure the normal use next time.

5. After the charging work is completed, special attention should be paid to confirm that the wire rope NDT detector is already in the shutdown state and in good condition. After that, it should be packed and placed in a suitable position. Attention should be paid to a dry and ventilated position to avoid a dark and humid position to prevent the use from being affected by moisture and to avoid direct sunlight.

6. In addition, if there is a problem with the wire rope flaw detector, whether it is a fault or some other minor problems, it should be handled in time. The fault problem should be repaired in time. In addition, attention should be paid to the maintenance work, so as to ensure the accuracy of the test results and prepare for the next test.