Hunan Baoshan Mine Wire Rope Detector Training

Release time:

2019-09-17

In April 2019, Baoshan Mine purchased a wire rope non-destructive tester from Beckett Company due to production demand. After the instrument was delivered, our company sent professional technicians to the site for training. However, when the mine used it in June, the operation was not skilled and the test data fluctuated greatly, so our company sent technicians to carry out the second training in July. After arriving at the site, the Baikete technicians first explained the detection steps one by one, and then carried out real-time operation demonstration on the site. After the detection of two hoists, the mine has mastered the detection process of the wire rope detector.

Hunan Baoshan Mine Wire Rope Detector Training

However, when the mine used it in June, the operation was not skilled and the test data fluctuated greatly, so our company sent technicians to carry out the second training in July.

After arriving at the site, the Baikete technicians first explained the detection steps one by one, and then carried out real-time operation demonstration on the site. After the detection of two hoists, the mine has mastered the detection process of the wire rope detector.

sdfsf

After the training of the detection process, Baikert began to train the mine to analyze the detection map. However, after the actual operation and detection of the mine personnel, it was found that LMA fluctuation phenomenon appeared in the map, and the fluctuation range could reach 8% at most, which greatly affected the analysis of the detection data.

sfsdf

In view of this special situation, Baikal personnel disassembled the equipment on site and removed the sensor, but no abnormality was found. After changing the position of the sensor, the problem was still unsolved. Later, after many inquiries, the cause of the accident was found. Therefore, our company negotiated with the mine to bring the equipment back to the company to find out the cause.

After the equipment was brought back to the company, the professional technicians of Baikete found through various inspections that the cause of this time was: the main board of the detector was damp, and the instrument operated normally after the main board was replaced. Now the equipment has been sent to the mine, and the mine is very satisfied with the training and treatment method!

sfsdfsf