Technical performance of wire rope nondestructive flaw detector

Release time:

2021-08-13

The wire rope nondestructive flaw detector adopts the principle of permanent magnet and magnetic flux leakage. When testing, first use a set of permanent magnets to magnetically saturate the wire rope. Then, the magnetic head wrapped in a wire rope runs at a relatively uniform speed. Any defects on the surface of the wire rope, such as broken wires, wear, corrosion, etc., will cause changes in the amount of magnetic flux leakage and magnetic flux, which will be captured by the Hall sensor and converted into electrical signals to output intuitive analog signals. So, what is its technical performance?

Technical performance of wire rope nondestructive flaw detector

　　Wire rope nondestructive flaw detectorThe principle of permanent magnet and magnetic flux leakage is adopted. When testing, first use a set of permanent magnets to magnetically saturate the wire rope. Then, the magnetic head wrapped in a wire rope runs at a relatively uniform speed. Any defects on the surface of the wire rope, such as broken wires, wear, corrosion, etc., will cause changes in the amount of magnetic flux leakage and magnetic flux, which will be captured by the Hall sensor and converted into electrical signals to output intuitive analog signals. So, what is its technical performance?

The flaw detector strictly follows the standards of GB/T21837-2008 "Electromagnetic Detection Method for Ferromagnetic Wire Rope" and MT/T970-2005 "Online Nondestructive Quantitative Detection Method and Judgment Rules for Wire Rope (Cable)" to quantitatively detect and discriminate the hidden dangers and damage levels that endanger the safety of use, such as internal and external wire breakage, local fatigue, abrasion and corrosion, and structural deformation of the wire rope, thus realizing non-contact wide distance detection of the wire rope, it is not affected by wire rope grease, general warping and running speed, and has strong detection ability. The humanized interface design makes the operation very convenient. After the wire rope nondestructive flaw detector completes the test, it can instantly and randomly check the test data, waveform chart, analysis report and digital test results, and connect the printer to print out the test report in a standardized format in time, providing users with a scientific basis for safe use and reasonable update.

Luoyang Baikte Technology Development Co., Ltd. is mainly engaged in high-performance friction liners, wire ropes, rope grease, CNC rope groove maintenance equipment,Non-destructive testing of steel wire ropeEquipment and other products, the company always adhere to honesty, service first, in good faith and development. All employees of the company provide quality service to each customer with full enthusiasm.