Functions of wire rope nondestructive testing system

Release time:

2021-08-03

Functions of wire rope nondestructive testing system

　　1、Non-destructive testing of steel wire ropeThe system can realize intelligent unattended operation mode, 24 hours of wire rope online automatic measurement and control.

2. Wide distance detection can be realized. The detection distance between the detection sensor and the surface of the steel wire rope should reach 30mm, which can ensure the speed of the steel wire rope at 18 m/s. The online automatic measurement and control of the steel wire rope within 24 hours will not scratch the sensor, cause damage to the hoisting winch and cause safety accidents.

3. It can qualitatively detect various damages such as broken wires, abrasion, corrosion, fatigue, deformation and loose strands inside and outside the wire rope on line, and quantitatively give the magnitude and specific location of each damage.

4, high detection accuracy, strong resolution, accurate detection results, wire rope non-destructive testing can be caused by various damage inside and outside the wire rope effective metal cross-sectional area loss equivalent of quantitative judgment of uncertainty of 0.5.

5. The weight of the test body and magnet used is less than 2kg, which is only 1/6-1/20 of that of similar products in various countries. It is extremely light and dexterous to install and use.

6. The distance between the inner sleeve and the surface of the wire rope to be tested is 20-30mm, and the design mode of relative movement between the guide wheel and the wire rope to be tested is adopted. The passing capacity of the wire rope during detection is generally not affected by the blocking factors such as wire rope deformation, sludge, dirt, and warping, and is suitable for testing in various harsh working conditions.

7, according to the detected wire rope damage value size, and compared with historical data, analysis of the change trend of wire rope damage, combined with the relevant national standards, to assess the remaining carrying capacity of the wire rope, safety factor and service life.

8. It can automatically save the inspection data according to the non-destructive inspection time of the wire rope, generate the database, inspection report, waveform chart and inspection report, and can view and print the inspection data and inspection report at any time.

9. Graded sound and light warning can be realized in the process of automatic detection.

10. It can be interconnected with the existing local area network of the user unit to realize remote data viewing and analysis.

11, with a friendly man-machine interface, clear, remote parameter setting and automatic calibration, wire rope nondestructive testing operation is convenient.

12. It can be equipped with fault self-diagnosis function to ensure reliable operation of the equipment.

　　13、NDT for wire ropeThe system has the functions of waterproof and anti-icing, which can meet the normal use under special working conditions, and is not affected by factors such as experience, skills, temperature, speed, noise, water drenching, wire sticking, and oil pollution.