Technology makes production safer.
Correct use method of wire rope buckle
Release time:
2022-11-07
Luoyang Baikte Technology Development Co., Ltd. is mainly engaged in products and services such as wire rope non-destructive testing, wire rope non-destructive testing instrument, wire rope non-destructive testing service, wire rope flaw detector, wire rope non-destructive testing instrument, etc. The company is based on the safe development of the industry, deepens scientific and technological innovation, strengthens international cooperation, creates service characteristics, continues to provide effective guarantee for wire rope safety in many fields, serves national economic construction, and contributes to create a better life.
Correct use method of wire rope buckle
Wire rope chuck is also called wire rope buckle. The wire rope chuck is mainly used for the temporary connection of the wire rope, the fixing of the rear hand rope when the wire rope is wound around the pulley set, and the fixing of the wind rope rope head on the derrick, including phosphating coated wire rope, galvanized wire rope, stainless steel wire rope and smooth wire rope. It is a wide range of wire rope clamps used in lifting operations. There are 3 types of wire rope clamps that are commonly used: riding type, fist grip type and pressing plate type. Among them, the riding card is a standard wire rope clip with very strong connection force and is widely used. Secondly, the press plate type is only used in secondary places because there is no base, which is easy to damage the wire rope and the connection force is poor.
Next, the staff of Luoyang Baikte Technology Development Co., Ltd. will explain the correct use of the wire rope buckle:
1. When selecting rope clamp, the side net distance of U-shaped ring should be about 1~3mm larger than the diameter of steel wire rope. If the net distance is too large, the connection in the buckle will not tighten the steel wire rope, causing sliding and accidents.
2. The bolts of the buckle shall be tightened, generally based on the flattened diameter of the wire rope;
3, U-shaped part should be in contact with the wire rope head, can not be reversed with the main rope; rope clamp installation to a smooth, equidistant arrangement;
4. In order to check whether the rope clamp joint is safe and reliable or find out whether the rope joint is sliding in time, another rope clamp is generally added about 500mm behind the rope clamp at the end, and the rope head is released into a "safe bend"; If the wire rope joint slips, the phenomenon that the "safe bend" is straightened can be visually displayed, and treatment measures should be taken in time.
Luoyang Baikte Technology Development Co., Ltd. main wire rope nondestructive testing,Wire rope nondestructive detector, wire rope non-destructive testing services, wire rope flaw detectors, wire rope non-destructive flaw detection detectors and other products and services, the company is based on the safe development of the industry, deepens scientific and technological innovation, strengthens international cooperation, creates service characteristics, and continues to provide effective guarantee for the safety of wire ropes in many fields. serve the country's economic construction and contribute to the creation of a better life for the people.
The article content comes from the wire rope nondestructive testing instrument:http://www.lybkt.com/
Next Page
Next page:
recommend News
Service hotline
China (Henan) Pilot Free Trade Zone Luoyang Area High-tech 288 Heluo Road, Development Zone
Wechat Number
SAF Coolest v1.3.1.1 设置面板 GAGSD-ZGYF-JXSVE-SAS
无数据提示
Sorry, the current column is being updated, please look forward to it!
You can view other columns or returnHome Page