Technology makes production safer.
Technical Specification Requirements for Wire Rope NDT
Release time:
2022-10-08
As a "highly dangerous component" in coal mine engineering lifting, lifting and transportation equipment, wire rope is regarded as the "lifeline" in this field, but in real life, due to the lack of scientific methods of use or technology is not up to standard. It has always been a "non-timed dangerous goods" for major equipment management ". This requires us to have some specifications for the technical requirements of wire rope NDT.
Technical Specification Requirements for Wire Rope NDT
As a "highly dangerous component" in coal mine engineering lifting, lifting and transportation equipment, wire rope is regarded as the "lifeline" in this field, but in real life, due to the lack of scientific methods of use or technology is not up to standard. It has always been a "non-timed dangerous goods" for major equipment management ". This brings usWire rope nondestructive flaw detectorThere are some specifications for the technical requirements.
1, wire rope nondestructive flaw detector should be based on the actual situation of the coal mine main shaft, auxiliary shaft site, detection is convenient and shall not affect the operation of other equipment.
2. Detect various defect functions such as internal and external wire breakage, wear, deformation, loose strand, wire jumping, material change, etc.
3. According to the requirements of "Coal Mine Safety Regulations", the detection report is generated. The content of the report can reflect various real-time data of the wire rope, and judge whether it exceeds the limit and whether it can continue to be used. The wire rope nondestructive flaw detector can display the limit, the test data can be compared and analyzed by historical statistics, scientifically predict the service life of the wire rope, and objectively evaluate the safety and reliability of the wire rope.
4. Requirements for relative operating speed with steel wire rope: 0-5 m/s, diameter range of steel wire rope that can be detected is 30-60mm, rope length of one continuous detection should be greater than mine lifting height (>485m), and system detection accuracy should be above 95%.
5. The wire rope nondestructive detector is durable, safe and reliable.
The content of the article comes from the wire rope nondestructive flaw detector:http://www.lybkt.com/
Previous Page:
recommend News
Service hotline
China (Henan) Pilot Free Trade Zone Luoyang Area High-tech 288 Heluo Road, Development Zone
Wechat Number
SAF Coolest v1.3.1.1 设置面板 GAGSD-ZGYF-JXSVE-SAS
无数据提示
Sorry, the current column is being updated, please look forward to it!
You can view other columns or returnHome Page