Maintenance and Troubleshooting of Wire Rope NDT

Release time:

2022-04-18

The wire rope non-destructive flaw detector can display the quantitative values of wire breakage, corrosion, wear and metal cross-sectional area change inside and outside the wire rope in real time, and put forward diagnostic reports and solutions according to the current standards and regulations, thus realizing the rapid diagnosis of wire rope damage,

Maintenance and Troubleshooting of Wire Rope NDT

　　Wire rope nondestructive flaw detectorIt can display the quantitative values of wire breakage, corrosion, abrasion and metal cross-sectional area change inside and outside the wire rope in real time, and put forward diagnostic reports and solutions according to the current standards and regulations, thus realizing rapid diagnosis of wire rope damage, reducing the detection time of wire rope exponentially, without affecting normal production during detection, and solving the problems of low efficiency of manual rope inspection, inability to inspect internal damage and human factors. The instrument is easy to carry, simple to operate, and the operator can operate and use after simple training, with high detection accuracy, good repeatability and accurate damage location.

Below, the Baikete editor will share with you the maintenance and troubleshooting of the wire rope NDT. Let's have a look!

3. maintenance

The oil stain on the wire rope does not affect the test results, but the oil stain on the sensor guide sleeve and encoder guide wheel should be cleaned up after each test of the wire rope NDT. The sensor probe is a precision instrument and should be placed in a ventilated and dry place. Because there are various miniature sensitive components inside, users should not disassemble them by themselves. When the lower half of the spring is stuck, the guide sleeve can be pushed carefully by hand.

4. fault handling

The whole system of wire rope NDT is generally free of faults in use, but when there is a problem with computer operation, please ask the computer specialized personnel for inspection and guidance. If it cannot be solved, please notify the supplier to put forward service requirements.

Luoyang Baikte Technology Development Co., Ltd. Main Products:Non-destructive testing of steel wire rope, wire rope nondestructive flaw detection, wire rope nondestructive testing instrument, wire rope nondestructive flaw detector and other products, our company is a strong technical force of high-quality development groups, for the majority of users to provide high quality products, complete solutions and excellent technical service company. For more information, welcome to inquire!