Work Flow of Wire Rope Flaw Detection System

Release time:

2022-02-01

In the key parts of the wire rope that need to be monitored, the mode combination detection device is fixedly installed, and the wire rope flaw detection work is automatically completed during the normal operation of the wire rope. The basic actions are:

Work Flow of Wire Rope Flaw Detection System

In the key parts of the wire rope that need to be monitored, the mode combination detection device is fixedly installed to automatically complete the inspection during the normal operation of the wire rope.Wire rope flaw detectionWork. The basic actions are:

The weak magnetic loading component first carries out the weak magnetic planning of the measured wire rope, and then the high-performance sensor detection component completes the extraction of the whole state information of the measured wire rope and outputs the original detection signal.

After receiving the original detection information, the intelligent data acquisition conversion device carries out preliminary processing and information storage on the original data, and transmits the wire rope flaw detection signal in operation back to the main control center in real time through wired or wireless communication transmission.

The stroke encoder is coupled with the linkage mechanism of the target wire rope, and according to the traveling position of the wire rope, the position information represented by the pulse signal is formed and transmitted to the main control center synchronously with the wire rope damage signal.

The self-controlled alarm device provides an early warning light source signal for evaluating the safety state of the wire rope according to the processing results of the multi-function data acquisition conversion workstation, which is used to indicate the intact degree of the wire rope flaw detection: the green light indicates that the wire rope is in a safe state; The yellow light indicates that the damage value of the measured wire rope is between 60 and 90 of the safety warning line, prompting the user to pay more attention. The red light indicates that the wire rope has been seriously damaged.

The multi-channel terminal master control device, that is, the terminal program master control center, can comprehensively analyze the collected detection information through the program software, provide users with daily analysis and processing results and the damage change trend of the wire rope, and display or print out the detection report through the terminal. Users can see the safety status of the wire rope very clearly from the wire rope NDT report.