Basic Actions of Wire Rope Nondestructive Testing

Release time:

2021-10-25

In the key parts of the wire rope that need to be monitored, the wire rope non-destructive testing device is fixedly installed, and the wire rope is automatically tested during the normal working process of the wire rope. The basic actions are:

Basic Actions of Wire Rope Nondestructive Testing

In the key parts of the wire rope to be monitored, fixed installationNon-destructive testing of steel wire ropeThe device automatically completes the detection of the wire rope during the normal operation of the wire rope. The basic actions are:

The weak magnetic loading component first carries out the weak magnetic planning of the measured wire rope, and then the high-performance sensor detection component completes the extraction of the whole state information of the measured wire rope and outputs the original detection signal.

After receiving the original detection information, the intelligent data acquisition conversion device performs preliminary processing and information storage on the original data, and transmits the running wire rope non-destructive detection signal back to the main control center in real time through wired or wireless communication transmission.

The stroke encoder is coupled with the linkage mechanism of the target wire rope, and according to the traveling position of the wire rope, the position information represented by the pulse signal is formed and transmitted to the main control center synchronously with the wire rope damage signal.

The self-controlled alarm device provides an early warning light source signal for evaluating the safety state of the wire rope according to the processing result of the multi-function data acquisition conversion workstation, which is used to indicate the damage integrity of the wire rope in NDT: green light indicates that the wire rope is in a safe state; Yellow light indicates that the damage value of the measured wire rope is between 60 and 90 of the safety warning line, prompting the user to pay more attention; Red light indicates that the wire rope has been seriously damaged and in danger.

The multi-channel terminal master control device, I .e. the terminal program master control center, can be comprehensively analyzed and collected through the program software.NDT for wire ropeDetection information, to provide users with daily analysis and processing results and wire rope damage trends and through the terminal display or print out the test report. Users can clearly see the safety status of the wire rope from the test report.