Technology makes production safer.
Bakert Steel Wire Rope Nondestructive Testing Instrument – Nondestructive Testing Data Acquisition and Export
Release time:
2025-08-29
I. Initiation of Testing and Data Collection
Once calibration is complete, nondestructive testing of the wire rope can proceed officially.
Press the power button, and after the reading stabilizes, press. “ record Press the “key”; when the indicator light turns on, you can begin the test. After the test, press it again. record Press the “key”; when the indicator light goes off, it indicates that the recording is valid, and the device can be powered down. To verify the repeatability and accuracy of the test results, the measurement can be repeated multiple times.
II. Export Test Data
After completing the testing, open the memory module cover and lift the sealing cap slightly to confirm the positions of the connector pins and the connector itself, then insert it; the other end is… USB Connect the interface directly to the computer, then press the memory switch, and the data will be transferred to the computer.
recommend News
Service hotline
China (Henan) Pilot Free Trade Zone Luoyang Area High-tech 288 Heluo Road, Development Zone
Wechat Number
SAF Coolest v1.3.1.1 设置面板 GAGSD-ZGYF-JXSVE-SAS
无数据提示
Sorry, the current column is being updated, please look forward to it!
You can view other columns or returnHome Page